Jennings High Voltage Divider

Last Updated: 2007-11-08

This was a recent Ebay find... I cant say it was cheap, but I think worth it...

1000:1 division ratio, 50KV peak, 10mhz bandwidth

	This is with the bottom cover plate removed. They didnt provide very good strain relief for the coazial cable because it had almost broken off... I resoldered it.
	Looking down from the top into the socket assembly
	I added the zip tie to keep the cable strain off the solder joint :)
	Plug and lower half of this two part vacuum capacitor.
	Size compared to my homemade high voltage probe... Should be interesting to really compare them on some real high voltage signals, havnt got around to it yet.

Home Page